Salmonella Testing for Dietary Supplements

Ensure Safety, Quality, and Compliance

Release batches earlier with next-day detection of Salmonella in gummies, powders, botanicals, oils, and other challenging supplement matrices, backed by USP <1223> equivalency data.

Dietary supplement samples prepared for Salmonella qPCR testing

Why Salmonella Testing Is Critical in Supplements

Salmonella is a common foodborne pathogen that can trigger serious illness, recalls, or regulatory action.

In dietary supplements, botanical raw materials carry the highest risk of Salmonella exposure. Plants often pick up microbes from soil, irrigation water, and post-harvest handling, and many botanicals receive no kill step before encapsulation or blending. Dry products, such as powders, are also at risk because Salmonella can survive for long periods in low-moisture conditions, waiting in a dormant state until moisture increases so it can proliferate. 

Under 21 CFR Part 111, manufacturers set specifications for raw materials, in-process materials and finished products, then verify that each lot meets them. Dietary supplement manufacturers typically follow established compendial standards—such as USP <2022> and USP <62>—which explicitly require the absence of specified objectionable organisms, including Salmonella spp., E. coli, and Staphylococcus aureus, in finished dietary supplements and raw botanicals

Next-Day Salmonella Detection with PathoSEEK®

The PathoSEEK workflow starts with a ~20–24 hour enrichment to ensure low levels of harmful pathogens have the opportunity to replicate. DNA is then extracted from the sample using MaGiC Lysis Kits. Next, the qPCR reaction is setup using the extracted DNA, PathoSEEK Detection Assay, and additional reagents.  Finally, that qPCR reaction is placed in the Mic qPCR Cycler, and after a sub 2-hour instrument run, results are delivered.

Every reaction includes an internal amplification control. If a matrix inhibits PCR, the control flags it, so a negative result is a result you can defend in an audit.

The Myra Liquid Handler automates extraction and plate setup, leaving one manual pipette step per sample.

Two PathoSEEK multiplexes detect Salmonella:

Assay Targets Choose it when
PathoSEEK® Salmonella, E. coli, & Staph aureus Multiplex Salmonella spp., E. coli, S. aureus Your specification covers all three USP <2022> organisms (most finished‑product specs)
PathoSEEK® Salmonella & E. coli Multiplex Salmonella spp., E. coli Your specification requires only those two organisms

Equivalent to USP Plating for Salmonella

Independent studies by Cambium Analytica, an NSF-certified CRO, demonstrated equivalency of PathoSEEK® with MaGiC Lysis to USP <2022>/<62> compendial plating, using Xylose Lysine Deoxycholate (XLD) agar with biochemical confirmation as the Salmonella reference method.

Detection down to 1 CFU. In a certified reference material dilution series, PathoSEEK detected Salmonella in 5 of 5 replicates at 1 CFU per test portion on both the Mic and Bio-Rad CFX Opus. LOD95 was 1.41–1.63 CFU per test portion across instruments.

Matrices tested: energy shot, vitamin gummy, vitamin powder, botanical powder, MCT oil and chocolate bar.

Parameter Result Status
Specificity No false positives against off‑target organisms across all matrices and instruments ✓ PASS
Limit of detection No significant difference from the compendial method at any inoculation level ✓ PASS
Repeatability Average RSD of log‑transformed Cq values ≤5%, within the ≤10% criterion ✓ PASS
Ruggedness Concordant results on two qPCR instruments, BMS Mic and Bio‑Rad CFX Opus ✓ PASS
Robustness No inhibition in high‑polyphenol matrices with matrix‑specific sample prep ✓ PASS
Equivalency Non‑inferiority demonstrated, with method agreement ≥96% across all conditions ✓ PASS

PathoSEEK® Triplex vs. USP Culture

PathoSEEK® Triplex + MaGiC

1 Enrichment = 1 qPCR Reaction per sample

Time To Release Batch

1.0 - 1.2 Days

Analyst Hands-On

~1.5 Hours/batch

~2 mins / sample (est.)

  • Fastest Allowed By Method
  • Hands-On Time
  • Up to Full Incubation

PathoSEEK Steps

  1. 1. Weigh and Homogenize 46 Samples (1 min/sample)
  2. 2. Enrich 46 Samples in BPW, 37 °C
  3. 3. Transfer 46 enrichments to plate
  4. 4. MaGiC Lysis + qPCR Setup (Myra, walk-away)
    • Automated MaGiC Lysis on Myra
    • Heat step on heat block
    • Automated qPCR setup into Mic tubes on Myra
  5. 5. One Mic run: 46 samples + 2 controls (48 wells)
  6. 6. Review and report 46 results

Compendial Culture (USP <2022>/<62>)

3 Parallel Selective Paths

Time To Release Batch

2.7 - 6.2 Days

Analyst Hands-On

~8.8 Hours/batch

~11.5 mins / sample (est.)

  • Fastest Allowed By Method
  • Hands-On Time
  • Up to Full Incubation

Compendial Culture Steps

  1. 1. Weigh and Homogenize 46 Samples (1 min/sample)
  2. 2. Pre-enrich 46 Samples in TSB, 30-35 °C
  3. 3. Inoculate 92 broths; streak 46 MSA plates
  4. 4. MacConkey broth (E. coli) | RVS broth (Salmonella)
  5. 5. Streak 92 MacConkey and XLD plates
  6. 6. Incubate agar plates
  7. 7. Read and record 138 plates
  8. 8. Review and report 46 results

All-negative scenario; no confirmation testing included. Handling steps sized for one analyst working a 46-sample batch; compendial ranges per USP <62> minimum vs. full incubation. PathoSEEK® assumes one 48-well run on the Mic qPCR Cycler (46 samples + 2 controls); MaGiC Lysis, the heat step and qPCR setup are walk-away and not counted as hands-on; sample weighing at 1 min/sample (~46 min per batch, one analyst) is the same for both methods and is included in elapsed and hands-on time. Source: USP <1223> Equivalency Study: PathoSEEK® Salmonella, E. coli, and Staph Multiplex in Dietary Supplements (PDF)

For 46 samples tested for Salmonella, E. coli and S. aureus, PathoSEEK releases in about 1 day using one qPCR reaction per sample.

46 samples, three organisms PathoSEEK® Triplex USP compendial culture
Time to release ~1 day Up to 6.2 days
Analyst hands‑on time 1.5 hours 8.8 hours
Consumables 46 qPCR reactions 138 plates

Easy enough for in-house, powerful enough for Commercial Labs

Whether you’re testing your own product or someone else’s, you can get reliable results, faster when you partner with Medicinal Genomics. 

SUPPLEMENT BRANDS & CMOS

Remove the Microbial Bottleneck

Under 21 CFR Part 111, you’re responsible for testing raw materials, in-process, and finished goods. Next-day turnaround means your QC lab is never the reason a batch sits waiting for a week.

qPCR pipette

commercial labs

Process More Samples and Deliver Results Faster

Your clients know that time is money. With our rapid microbial testing platform, you can provide valuable insights to your customers before it’s too late.

Salmonella Testing FAQ

Results arrive the next day. The workflow uses a ~20–24 hour enrichment followed by a sub-2 hour qPCR run. Culture with confirmation typically takes 3–6 days.

Independent USP <1223> studies by Cambium Analytica showed no significant difference in limit of detection from compendial plating, with method agreement of 96% or higher across six supplement matrices.

Choose the Salmonella, E. coli, & Staph aureus Multiplex if your specification covers all three USP <2022> organisms. Choose the Salmonella & E. coli Multiplex if it requires only those two.

Yes. The equivalency studies included vitamin gummies, MCT oil, botanical powder and chocolate. An internal amplification control in every reaction flags inhibition, so an inhibited sample never reads as a clean negative.

Yes. In both studies, every positive sample carried Salmonella together with the other target organisms, and each channel detected its target at the low level.

The USP <1223> equivalency studies give your QA file third-party data for each assay, and our team helps you build the method validation documentation during onboarding.

Salmonella Testing for Natural Products

READ MORE >

Listeria Testing for Natural Products

READ MORE >

E. Coli Testing for Natural Products

READ MORE >

Trusted By

Partner With Medicinal Genomics

With our advanced qPCR-based platform, expert team, and deep experience in microbial testing for natural products, Medicinal Genomics is your trusted partner in ensuring safe, compliant supplements.

👉 Get in touch today to get started with Salmonella testing for dietary supplements and explore our full suite of qPCR detection assays.

MaGiC™ Lysis

Simplified DNA Extraction Process

SenSATIVAx®

Purify Plant and Microbial DNA

Grim Reefer®

Eliminate Dead DNA

PathoSEEK®

qPCR Detection Assays

PathoSEEK® ID

Identify Species in Failed Samples

FemINDICAtor®

Plant Sex Detection Assay

Mic & Myra

Automated Liquid Handling & qPCR

LIDAR

Breakthrough Multiplex Technology

Sequencing

Valuable Insights and Actionable Data

Fill form to watch Video