Listeria in Food testing

AOAC Performance Tested Method 112601

Detect Listeria spp. and L. monocytogenes in RTE meats, fresh produce, dairy powder and a variety of surfaces: stainless steel, ceramic, sealed concrete and plastic.

Why Listeria Testing is Important

Listeria monocytogenes is a dangerous human pathogen that causes listeriosis. The FDA estimates about 1,600 U.S. cases and 260 deaths each year, with the highest risk to pregnant women, newborns, adults over 65, and people with weakened immune systems (FDA).

Listeria grows at refrigeration temperatures, across wide pH ranges and in high salt. It also settles into drains, floors, conveyors, and equipment framing, where it can contaminate products after the kill step. That’s why ready-to-eat foods carry the most risk.

USDA FSIS’s Listeria Rule (9 CFR Part 430) requires establishments making post-lethality exposed RTE meat and poultry to control L. monocytogenes, including food-contact surface testing. FDA’s Preventive Controls rule (21 CFR Part 117) calls for environmental monitoring when an RTE food is exposed to the plant environment.

Most programs track Listeria spp. on surfaces as an indicator, then confirm L. monocytogenes when a zone turns positive. The faster that answer comes back, the sooner you can clean, re-swab and release.

The Limitations of Traditional Listeria Detection

Culture-based detection methods, while standard, present challenges:

These limitations delay critical quality decisions and can compromise safety in fast-moving food production environments.

Two Listeria Targets in One Reaction

The PathoSEEK® Listeria Mono & Spp. Multiplex Detection Assay with MaGiC Lysis detects down to 1 CFU per test portion and reads three channels in every well:

Channel Target What it tells you
FAM Listeria spp. Indicator for environmental monitoring and sanitation verification
Cy5 L. monocytogenes The pathogen, called separately from the genus
HEX Internal control Lysis and amplification worked, so a negative result is valid
Workflow
  1. Enrich sample for 24–34 hours, depending on matrix.
  2. Extract DNA from with MaGiC Lysis Kit
  3. Setup qPCR Reaction with the extracted DNA and PathoSEEK reagents
  4. Run qPCR reaction on the BMS Mic, delivering results in less than 2 hours.

Certified Under the AOAC PTM Program

PathoSEEK® Listeria Mono & Spp. Multiplex is certified by AOAC Research Institute as Performance Tested Method℠ 112601, across four foods and four environmental surfaces.

Matrix Test portion Enrichment (BLEB, 32 ± 1 °C) Dilution before qPCR Confirmation method
Hot dogs 125 g 4 h + 20–24 h selective None USDA FSIS MLG 8.15
RTE sliced deli turkey 125 g 4 h + 20–24 h selective None USDA FSIS MLG 8.15
Bagged fresh spinach 125 g 4 h + 26–30 h selective None FDA BAM Ch. 10
Whey powder 25 g 4 h + 24–28 h selective 1:10 FDA BAM Ch. 10
Stainless steel, ceramic tile 4″ × 4″ sponge 4 h + 20–24 h selective None FDA BAM Ch. 10
Sealed concrete, plastic 1″ × 1″ swab 4 h + 20–24 h selective None FDA BAM Ch. 10

Confirm presumptive positives by the method listed for the matrix.

The user guide also includes protocols for cannabis, hemp and dietary supplement matrices. Those sit outside the PTM claim and need matrix verification in your lab. 

PathoSEEK vs. Culture for Listeria

PathoSEEK clears negative samples the day after it’s collected for most matrices. Culture takes 3–4 days to call a negative and 5–7 days to confirm a positive.

Negative result PathoSEEK® Listeria Mono & Spp. Culture
Environmental sponge or swab ~26–30 hours 3–4 days
Hot dogs, deli turkey ~26–30 hours 3–4 days
Whey powder ~30–34 hours 3–4 days
Bagged spinach ~32–36 hours 3–4 days

Built for Food Processors and Food Testing Labs​

Any trained lab technician can run the workflow. Our team supports method transfer and the verification records your food safety plan needs.

FOOD PROCESSORS

Increase Testing Frequency and Respond In Real Time

Screen products, equipment, and environment for Listeria spp. and Listeria mono with a certified, rapid method. When a zone turns positive, you can clean, re-swab and see the result the next day.

qPCR pipette

commercial labs

Process More Samples and Deliver Results Faster

Add an AOAC PTM-certified Listeria method to your menu with one reaction per sample covering genus and species. 

Frequently Asked Questions

Yes. The PathoSEEK® Listeria Mono & Spp. Multiplex is AOAC Performance Tested Method℠ 112601, certified for hot dogs, RTE sliced deli turkey, bagged fresh spinach, whey powder and stainless steel, ceramic, sealed concrete and plastic surfaces.

Negative results arrive in about 26–30 hours for environmental samples and RTE meats, and 30–36 hours for whey powder and spinach. Culture takes 3–4 days for a negative and 5–7 days to confirm a positive.

4″ × 4″ sponges pre-moistened with 10 mL Hi-Cap Neutralizing Broth for stainless steel and ceramic, and 1″ × 1″ swabs with 1 mL for sealed concrete and plastic.

The BMS Mic and the Bio-Rad CFX Opus 96 or CFX 96 are the certified platforms.

Listeria spp. is the standard indicator in environmental monitoring, because a genus positive points to conditions where L. monocytogenes can survive. Reading both in one reaction tells you whether a positive zone holds the pathogen itself.

Yes. Confirm presumptive positives by USDA FSIS MLG 8.15 for hot dogs and deli turkey, and FDA BAM Ch. 10 for spinach, whey powder and environmental surfaces.

Excess fat can raise baseline fluorescence on the Listeria spp. channel. The user guide gives Mic analysis settings that correct for it, and the internal control flags any inhibited reaction.

Get Started with Listeria Testing

Ensure products and production environments are free from harmful pathogens like Listeria, and demonstrate your brand’s commitment to safety, compliance, and quality.

Contact Medicinal Genomics to get a quote or learn more about our full suite of microbial safety solutions.

MaGiC™ Lysis

Simplified DNA Extraction Process

SenSATIVAx®

Purify Plant and Microbial DNA

Grim Reefer®

Eliminate Dead DNA

PathoSEEK®

qPCR Detection Assays

PathoSEEK® ID

Identify Species in Failed Samples

FemINDICAtor®

Plant Sex Detection Assay

Mic & Myra

Automated Liquid Handling & qPCR

LIDAR

Breakthrough Multiplex Technology

Sequencing

Valuable Insights and Actionable Data

Fill form to watch Video